11/19/06 - The red pull handle just in front of the yoke.
|
11/19/06 - A look inside at the completed BRS installation.
|
11/19/06 - The cover installed permanently.
|
11/11/06 - The pack installed.
|
11/11/06 - A view from the cockpit.
|
11/11/06 - The view from above.
|
10/28/06 - The weight of the pack.
|
5/20/06 - I installed the break-away cover for the parachute and finished the other side today.
|
5/7/06 - Only two rivets have to give way to release the harness and each is installed so it will let go.
|
5/7/06 - It looks like a motorcycle fender. That gives me an idea for my next project...
|
5/7/06 - Prepping the rear harness area.
|
5/6/06 - This worked better than I thought it would.
|
5/6/06 - Tidying up the bridle.
|
5/4/06 - My patented aluminum hole cover.
|
5/3/06 - One side completed.
|
5/2/06 - I just drilled a big hole in the side of my fuselage.
|
5/3/06 - The rear harness attached on the inside.
|
5/2/06 - The rear harness attached.
|
5/1/06 - Finished hole.
|
5/1/06 - Working on the Rear Fuselage Holes.
|
4/27/06 - Fitting the parts to find out where to attach.
|
4/29/06 - Trying out the harness for fit.
|
4/29/06 - Reinforcement under the cabin for the attach-point.
|
4/28/06 - This is what BRS calls the "Bridle extension."
|
Engine Photos
Fuselage Photos
Wing Photos
Tail Photos
Other Aviation Related Photos
